|
Hydraulic Power Packs
|
|
|
|
MINI POWER PACKS KL
- theoretical flow from 0,25 up to 7,8 cm³/rev.
- Working pressures up to 250 bar
- AC-, DC- and three-phase motors
|
 |
SMALL POWER PACKS ZA13
- Tank capacity 13 l
- Flow capacity from 2,2 up to 5,4 l/min.
- Working pressures from 140 up to 1290 bar
|
|
SMALL POWER PACKS ZA30
- Tank capacity 30 l
- Flow capacity from 8 up to 15 l/min.
- Working pressures from 100 up to 170 bar
|
|
|
|
SPECIAL POWER PACKS
|
|
|
|
Power pack "Slab turnover device"
- Tank volume: 1000l
- Flow capacity: 2x max. 160l/min.
- Working pressures: 2x max. 160 bar
- Power: 82,5 kW
Features:
The entire electrical operation of the power pack occurs using
Jet-Control technology and can thus be controlled from anywhere in the
world via internet!
|
|
Power pack for conveying bulk
- Tank volume: 800 litre
- Flow capacity: 2x max. 150 l/min.
- Working pressure: 2x max. 240 bar
- Power: 2x 30 kW
|
|
Power pack for mixing vessels
- Tank volume: 6 litre
- Flow capacity: ca. 5,2 l/min.
- Working pressure: 150 bar
- Power: 1,73 kW
|
|
|
|
Power pack for centrifugal beer filters in breweries
- Tank volume: 40 litre
- Flow capacity: 145 l/min.
- Working pressure: up to 300 bar
- Power: 45 kW
|
|
Joining installation for gridiron
- Tank volume: 250 litre
- Flow capacity: 12 / 2,5 l/min.
- Working pressure: 215 / 100 bar
- Power: 5,5 / 1,1 kW
|
|
Hydraulic-Diesel-Power unit for pipe drilling devices
- Tank volume: 2x 3000 litre
- Flow capacity: 1200 l/min.
- Working pressure: 300 bar
- Power: 480 kW
- Dimensions: 2,2 x 4,0 x 3,0 Meter
|
|
|
|
PRESSURE SWITCHES & ATEX-PRESSURE SWITCH
|
|
|
|
DS-117 DS-117(112)-***/ B
- 30 Ø
- Oil connection G 1/4 female
- flanshable as well as 90° angle connection (p max. 350 bar)
- max. adjusting pressure 350 bar
|
|
DS-117(112)-***/ B / V3
- 30 Ø
- Oil connection G 1/4 female
- max. adjusting pressure 350 bar
- with knurled knob
|
|
DS-117(112)-***/ B / M 12
- 30 Ø
- Oil connectionG 1/4 female
- max. adjusting pressure 350 bar
- with connection inlet M 12 x 1
|
|
|
|
DS-307(302)-***
- 40 Ø
- Oil connection G 1/4 female
- flanshable as well as 90°-subplate (p max. 350 bar)
- max. adjusting pressure 600 bar
|
|
DS-507(502)-***
- 40 Ø
- Oil connection G 1/4 female
- flanshable as well as 90°-subplate (p max. 350 bar)
- max. adjusting pressure 350 bar
|
|
DS-4*7(4*2)-***
- with 2 micro switches
- Connections and pressure ranges as DS-307(302)
|
|
|
|
DS-103 / ES / MS-***
- Intrinscally safe - for the mining industrie
- Admitted by BVS 95.D.1074
- Brass housing
- Oil connection G 1/4 female
- max. adjusting pressure 600 bar
|
|
DS-104 / EX-*** (ATEX)
- Explosion proof - for chemical gases etc.
- Admitted by PTB Nr. 01 ATEX 1005 X
- Oil connection G 1/4 female
- max. adjusting pressure 600 bar
|
|
|
|
|
|
HYDRAULIC MOTORS
|
|
|
|
HY - 3 SM
- Nominal torque up to 76.000 Nm
- Working pressures up to 210 bar
|
|
|
|
|
|
|
|
HYDRAULIC PUMPS
|
|
|
|
HIGH CAPACITY GEAR PUMPS:
1 SPA ** / 2 SPA ** / 3 SPA **
- Displacement from 0,9 up to 61,1 cm³/rev.
- Working pressures up to 270 bar
|
|
HIGH CAPACITY GEAR PUMPS:
4 ISP **
- Displacement from 60,3 up to 120 cm³/rev.
- Working pressures up to 190 bar
|
|
HAND PUMPS:
HP-** and HPV-**
- 18 up to 111 cm³ / double stroke
- Working pressures up to 460 bar
- With or without discharge valve
|
|
|
|
HAND PUMP UNITS:
HY-HP/** and HY-HPV/**
- Tank capacity 3, 6 or 10 l
- 18 up to 111cm3 / double stroke
- Working pressure up to 460 bar
|
|
TPV
- Displacement 6 up to 41 cm³ / rev.
- Working pressures up to 210 bar
- silent
- high speed of rotation
- compact design
- suitable for multiple pump assembly
- easy servicing
- built-in pressure relief valves
|
|
Series-V
- High efficiency
- Multiple optional control system
- Suitable for multiple pump assembly
- Electro-Hydraulic Proportional Pressure
- Low noise level
- Wide application ranges
- Long life
- Easy servicing
- Electro-Hydraulic Proportional
- Pressure & Flow Control Type
|
|
|
|
HYDRAULIC VALVES
|
|
|
|
DIRECTIONAL CONTROL VALVES
- Mounting configurations DIN 24340 resp. CETOP
- max. working pressure P-A-B-(X) = 350 bar
- at nominal size 6, 16, 25
- and 315 bar at nominal size 10
- Protection IP 65
|
|
MODULAR VALVES
- Mounting configurations DIN 24340 resp. CETOP
- Check valves
- Pilot operated check valves
- Throttle check valves
- Throttle valves
- Pressure relief valves
- Pressure sequence valves
- Shock valves
- Pressure reducing valves
- Overcentre valves
|
|
MOUNTING PLATES
- Mounting configurations DIN 24340 resp. CETOP
- Base plates
- Mounting plates
- End plates
|
|
|
|
MONOBLOCK DIRECTIONAL CONTROL VALVES:
PL 30, PL 50, PL 80 and PL 100
- Sectional control valves
- Possible to mount up to 10 elements
- Max. flow capacity from 50 up to 150 l/min.
- Working pressures up to 350 bar
|
|
MONOBLOCK DIRECTIONAL CONTROL VALVES:
PL 25 M, PL 35 M, P L 45 M, PL 55 M und PL 95 M
- Max. flow capacity from 40 up to 120 l/min.
- Working pressures up to 350 bar
|
|
Throttle valves and check valves
- Flow capacity up to 500 l/min.
- Working pressures up to 400 bar
|
|
|
|
Flow control valves
- Flow capacity up to 180 l/min.
- Working pressures up to 350 bar
|
|
PRESSURE VALVES
- Flow capacity up to 400 l/min
- Working pressures up to 350 bar
|
|
VALVES FOR MOBILE HYDRAULIC
- Pressure valves
- Check valves
- Control valves
- Pilot assisted overcentre valves
|
|
|
|
HYDRAULIC CYLINDERS
|
|
|
|
HYKS-Series
- Screwed/Welded assembly
- Piston dia. 32-200mm
- Piston rod dia. 18-140mm
- Working pressure up to 250 bar
- Without dumping
|
|
HYS-Series
- Screwed assembly
- Piston dia. 40-200mm
- Piston rod dia. 22-140mm
- Working pressure up to 250 bar
- With dumping
|
|
|
|
|
|
HYDRAULIC ACCESSORIES
We offer you a variety of hydraulic accessory
components !For example:
- Bladder accumulator
- Diaphragm accumulator
- Safety blocks
- Return line filters
- Pressure filters
- Suction filters
- Filling and venting filters
- Filling plugs
- Oil-level indicator
- Magnetic drain plug
|
|
|
|
|
|
|
|
|
A 
