Düsterloh hydro motors have been in successful use in industry for decades. Their well though-out design and sturdiness guarantee top reliability even under difficult operating conditions. In connection with downstream brakes and gears, drive solutions in a wide range of variants are available. The rotary speed and capacity of Düsterloh hydro motors can be set quickly, precisely and in infinite settings, which makes the motors particularly suitable for regulating tasks on machines with greatly varying capacity requirements. As actuating drives, stepper motors or self-regulating run-on motors – triggered directly through servo units – they have proved their suitability as precision drives over and over again, even in the field of extremely small rotary speeds. The areas of application range from mining to tooling machines and vehicle engineering through to a wide range of applications in plant engineering.

• Displacement 11-5278 cm³/rev
• Operating pressure -315 bar
• Capacity - 190 kW
• Torque 0.15-24343 Nm
• Speed range 2-3000 rpm

Düsterloh pneumatic motors have been designed for permanent operation and rough operating conditions. They also work reliably in a humid atmosphere and under extreme climatic conditions. The motors can be operated using air, nitrogen or gas. As standard, they are equipped with protective strainer seals, differential pressure oilers and adjustable rev limiters. Special versions for operation with unoiled air are available. Good sound absorption is guaranteed by long exhaust gas routing, additional downstream sound absorbers can also be delivered. Hardened and ground rotors ensure a long service life.

• Geometrical displacement 155-6116 cm³/rev
• Operating pressure -10 bar
• Capacity 2,8-66 kW
• Torque 9-420 Nm
• Speed range – 3000 rpm
• Air consumption 3,9-66 Nm³/min

Düsterloh pneumatic starters are used to start up diesel engines and turbines. They mainly comprise a toothed wheel motor, a single-track pinion with reduction gear and a valve combination. Since the toothed wheel motor develops its greatest torque when breaking out, it is particularly suitable for starting diesel engines. Düsterloh pneumatic starters can be operated using air or gas. They are independent of electrical energy systems, maintenance-free and explosion-safe. Their reliable operating behaviour guarantees safe starting of the diesel engine even under extreme environmental conditions, i.e. they can even be used for applications in the tropics, in the Arctic circle, in deserts or off-shore.

• Geometrical displacement 265-2360 cm³/U
• Operating pressure -15 bar
• Capacity 4.7-70 kW
• Start-up torque -510 Nm (Increase possible through design as a double starter)
• Air consumption 5.6-62 Nm³/min
• Weight 12,5-52 kg

Düsterloh Fluidtechnik GmbH specialises in project planning, designing, manufacturing and commissioning customer-specific fluid technology systems such as

hydraulic systems

• Tank sizes up to 8,000 dm³
• Tank materials steel and stainless steel
• Operating media mineral oil, gear oil, flame-resistant hydraulic fluids
• Pipes with cutting ring or welding taper screw connections
• Required power up to 110 kW motor-pump assembly
• Noise protection encapsulation for motor-pump units and complete power units

and

pneumatic control units

• Pneumatic switching systems in compact design
• Control units for pneumatic emergency drives for e.g. rotary furnaces, converters etc.
• Installation in stainless steel switch cabinet systems for use in aggressive environments

We supply systems "from a single source", including motors and cylinders as well as electronic controls with wiring, including documentation in several languages.

Our systems are used in all areas of mechanical and plant engineering.

Certification of Düsterloh Fluidtechnik GmbH according to EN ISO 9001 : 2000 ensures that the highest quality standards are observed.