Systems:

• GIGANTO: Damping of doors
• PIANINO: Damping of doors
• PIANO: Damping of doors

Systems:

• BAJO: Damping of drawers
• CALMO: Damping of drawers
• PLACIDO: Damping of drawers

Systems:

• RETRO 2: Damping of drawers
• CALMO: Damping of drawers

Systems:

• BAJO: Damping of drawers
• CALMO: Damping of drawers
• PLACIDO: Damping of drawers

Systems:

• PIANO: Damping of doors
• PIANINO: Damping of doors
• RETRO 2: Damping of drawers

Systems:

• SILENTO: Sliding doors
• SMUSO CD: Sliding doors

Standard damping system for a gentle and smooth closing.
• Long life cycle
• All-purpose
• Stroke: 48 mm
• Colour: (see figure)

Application range
i.e. ball bearing / or subsurface slides.
Max 25 kg per damper (50 kg per drawer).

Best operating temperature: 10°C-40°C

Mounting instructions
Base mounted.
Do not use as end-stop.
Dock piston rod to ball head.

Standard damping system for a gentle and smooth closing.
• Long life cycle
• All-purpose
• Stroke: 42 mm
• Colour: (see figure)

Application range
i.e. ball bearing / or subsurface slides.
Max 20 kg per damper (40 kg per drawer).

Best operating temperature: 10°C-40°C

Mounting instructions
Base mounted.
Dock piston rod to ball head.
Do not use as end-stop.

Standard damping system for a gentle and smooth closing.
• Door fully closes itself (no door crack)
• Long life cycle
• Retrofittable
• Colour: (see figure)

Application range
i.e. ball bearing / or subsurface slides
max 60kg per damper.

Best operating temperature:10°C-40°C

Mounting instructions
Base mounted.
Dock piston rod to ball head.
Do not use as end-stop.

Standard damping system for a gentle and smooth closing.
• Long life cycle
• All-purpose
• Stroke: 50 mm
• Plastic piston rod
• Colour: (see figure)

Application range
i.e. ball bearing / or subsurface slides.
Max 25 kg per damper (50 kg per drawer).

Best operating temperature: 10°C - 40°C

Mounting instructions
Base mounted.
Dock piston rod to ball head.
Do not use as end-stop

Damping system for a gentle and smooth closing.
• Long life cycle
• Retrofittable
• Colour: (see figure)

Application range
Drawers with subsurface, slot and ball bearing slides.
Max load bearing capacity: 25 kg per self closing unit.
For more capacity, use units on both sides, max 50kg.

Best operating temperature: 10°C - 40°C

Mounting instructions
Attach the damping unit to the corpus by using two screws.
The actuator will be attached to the drawer.
Do not use as end-stop.

Damping system for a gentle and smooth closing.
• Long life cycle
• Stroke: 19mm, elastomer-modified bounce head
• Colour: (see figure)

Application range
Flaps, lightweighted subsurface slides and doors.
Multiple dampers can be used to obtain a higher service performance in case of heavier doors.

Best operating temperature: 10°C-40°C

Mounting instructions
For drilling (borehole: Ø 10mm/ depth: x56mm).
Alternatively by using a clamp.
Do not use as end-stop.

Damping system for a gentle and smooth closing.
• Long life cycle
• Stroke: 15mm, elastomer-modified bounce head
• Colour: (see figure)

Application range
Flaps, lightweighted subsurface slides and doors.
Multiple dampers can be used to obtain a higher service performance in case of heavier doors.

Best operating temperature: 10°C - 40°C

Mounting instructions
For drilling (borehole: Ø 10mm/ depth: x45mm)
Alternatively by using a clamp.
Do not use as end-stop.

Damping system for a gentle and smooth closing.
• Long life cycle
• High forces
• Colour: (see figure)

Application range
In case of applied weight and minor velocity,
i.e. flap valves/ hinge range.

Best operating temperature: 10°C-40°C

Mounting instructions
Base mounted.
Do not use as end-stop.

Damping system for a gentle and smooth closing.
• Long life cycle
• Stroke: 19mm, elastomer-modified bounce head
• Colour: (see figure)

Application range
Flaps, lightweighted subsurface slides and doors.
Multiple dampers can be used to obtain a higher service performance in case of heavier doors.

Best operating temperature: 10°C - 40°C

Mounting instructions
Attach the damping unit to the corpus by using two screws.
Do not use as end-stop.

Damping system for a gentle and smooth closing.
• Long life cycle
• High forces
• Retrofittable
• Damping adjustable
• Colour: (see figure)

Application Range
For a variety of concealed hinges.

Best operating temperature:10°-40°C

Mounting instructions
Screw fixing.

Damping system for a gentle and smooth closing.
• Long life cycle
• Stroke: 15 mm, elastomer-modified bounce head
• Colour: (see figure)

Application range
Flaps, lightweighted subsurface slides and doors.
Multiple dampers can be used to obtain a higher service performance in case of heavier doors.

Best operating temperature: 10°C - 40°C

Mounting instructions
Attach the damping unit to the corpus by using two screws.
Do not use as end-stop.

Extension damping unit for a gentle and smooth closing.
• Long life cycle
• All-purpose
• Stroke: 110 mm
• Colour: (see figure)

Application range
i.e. presentation boards; sliding and pull out cabinet runners – wall display extension or pull out cabinet runners – single extension. max 80kg per damper.

Best operating temperature: 10°C-40°C

Mounting instructions
Base mounted. Dock piston rod to U-head.
Do not use as end-stop.

Standard damping system for a gentle and smooth
closing.
• Long life cycle
• All-purpose
• Stroke: 110 mm
• Color: (see figure)

Application range
i.e. presentation boards; sliding and pull out cabinet
runners-wall displays extension or pull out cabinet
runners-single extension.
max 80 kg per damper.

Best operating temperature: 10°C-40°C

Mounting instructions
Base mounted. Dock piston rod to Ball head.
Do not use as end-stop.

Standard damping system for a gentle and smooth
closing.
• Long life cycle
• All-purpose
• Stroke: 110 mm
• Color: (see figure)

Application range
Various performance classes
Convenient for door weight from 15 to 50 kg

Mounting instructions
Sidewise mountable

Self closing unit equipped with damping system for a gentle and smooth closing of sliding doors.
• Door fully closes itself (no door crack)
• Long life cycle
• Retrofittable
• Colour: (see figure)

Application range
I.e. sliding doors, max door wing weight: 25kg.

Best operating temperature: 10°-40°C

Mounting instructions
Screw fix the damping unit to corpus with two screws or countersink it on the face side.
Cover cap for screw fixing available.
Do not use as end-stop.

Self closing unit equipped with damping system for a gentle and smooth closing of slidingdoors.
• Door fully closes itself (no door crack)
• Long life cycle
• Retrofittable
• Colour: (see figure)

Application range
i.e. sliding doors whereas max door weight is 50kg.
Half-shells also available with sink hole for screws, various actuators available.

Best operating temperature: 10°-40°C

Mounting instructions
Attach the damping unit to the corpus by using three screws.
Do not use as end-stop.

Self closing unit equipped with damping system for a gentle and smooth closing of slidingdoors.
• Door fully closes itself (no door crack)
• Long life cycle
• Retrofittable
• Colour: (see figure)

Application range
i.e. sliding doors whereas max door weight is 50kg.

Best operating temperature: 10°-40°C

Mounting instructions
Attach the damping unit to the corpus by using two screws.
Do not use as end-stop.